Style 111

A low-tack stencil for use on pre-painted or soft wood surfaces. Designed specifically for easy hand-cutting, which means less wear on knives. White release liner is easily removed. When Blasting on raw wood, Anchor filler #211 is recommended.

  • Sizes available: 10-1/2″, 12-3/4″ 14-1/2″, 18-3/4″, 25″ and 30″ widths.

Style 116

A high-tack computer stencil for use on raw wood surfaces and urethane foam board. Features trimmed edges and a strong, clear film liner that offers easy alignment and smooth, precise running on computerized sign-making machines.

  • CAUTION: This stencil has a very aggressive adhesive and not recommended for use on some woods without first testing a sample piece. Do not use on pre-painted, pretreated or glass surfaces.
  • Sizes available: 15″ and 30″ widths.

Style 117

Medium-tack version of Style #116, specially designed for pretreated and pre-painted surfaces. Excellent for soft woods without the risk of surface lift. Can also be used safely on glass, tile and pretreated urethane foam board. Trimmed edges allow smooth accurate tracking through computerized sign-making machines. A strong, clear film liner provides extra rigidity.

 

  • Sizes available: 15″ and 30″ widths.

Style 120

A multipurpose, medium-tack stencil designed for shape and depth carving in glass, and for pretreated, pre-painted or soft woods. Extremely easy to hand-cut. Dark blue release liner lifts away easily. Stencil holds securely during blasting, removes cleanly and easily when finished. No filers are required, saving time n application and cleanup. Style #120 can also be used on tile, pretreated urethane foam board and Plexiglas.

  • Size available: 25″ width only.

Style 125

A high-tack stencil designed for sandblasting on raw wood and urethane foam board. has easy-release orange liner. The strength o f he adhesive eliminates the need for filler or spray adhesives.

  • CAUTION: This stencil has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on pre-pained, pretreated or glass surfaces.
  • Size available: 25″ width only.

Style 128

This 18-mil glass stencil is designed primarily for glass etching, but can also be used on wood, tile, acrylic, and pretreated urethane foam board. The paper liner removes easily. Style #128 is easily hand-cut and allows clear design detail. Has great blast resistance and can be easily pulled off without leaving residue on glass. Also conforms and holds securely to curved and irregular surfaces.

  • Sizes available: 25″ and 30-1/2″.

Style 130

A computer-cut version of our well-known #128 stencil. this 18-mil #130 can be run through tractor-feed or friction cutters. Can be used on glass, tile, acrylic and pretreated urethane foam boards. The 15″ and 30″ widths are hole-punched with the 1/2″ on center hole pattern and can be run on any computerized cutter that has 1/2″ on center style sprockets. The 30″ width will not run in large pin cutters. The 20″ width is un-punched and can be run on all friction feed cutters.

  • Sizes available: 15″, 20″ and 30″ widths.

Style 153

Designed for use on friction-feed cutters, this product can be used safely on pretreated and pre-pained wood, urethane foam board, glass, tile and acrylics. Rubber is trimmed back 1/2″ along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Since this type of plotter has no sprockets, holes are unnecessary (as in other computer stencils).

  • Sizes available: 19-7/8″ and 24″.

Style 155

Same construction as our #153 stencil, except this product has a water-based acrylic adhesive, rather than petroleum-based. Adhesion level is much higher than #153. rubber is trimmed back 1/2″ along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. This product can be used on raw wood and urethane foam board. CAUTION: This stencil has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on pre-painted, pretreated or glass surfaces. 

  • Sizes available: 17-7/8″ and 24″.

Style 157

Same construction as our medium-tack #117 computer stencil, except that the hole pattern is for use on a standard 1/2″ center sprocket system machine or computerized cutters with the same sprocket system. (1/2″ on center between holes.)

  • Size available: 30″ width only
  • (NOTE: Style #157 will not work on the large pin 30″ plotter; Style #117 is recommended for this use.)

Border Stencil

 #125 STENCIL. Pre-slit into 1/2″, 1″, 1-1/2″, 2″, 4″, 6″, and 12-1/2″ widths for use in masking off borders on sandblasted signs.

  • CAUTION: Do not use on pre-painted sign blanks or glass.

Filler

#211 FILLER Liquid adhesive designed to be used with #111 on raw wood. Specially designed and formulated to produce superior results with Anchor stencils.

Transfer Tape

Anchor #582 is a semi-bleached flat-back release coated paper. Coating is a medium adhesion rubber-based, pressure-sensitive adhesive. This excellent product is specially formulated for use as a design transfer tape with Anchor Stencils.

  • NOTE: #582 rolls are 100 yards in length. Stencil rolls are 110 yards.